3D Pen Starter Kit - Black
- Easy and safe payment
- Fast and secure delivery
- Ordered before 11 pm today, delivered monday!
- Ideal for beginning 3D illustrators
- Complete starter kit
- Inclusive 5 stencils
- 2 temperature settings
- 3 speed settings
Product description: 3D Pen Starter Kit
The 3D pen works with filaments, so you are tinkering with plastic, so to speak. The 3D-pen is suitable for both creative, educational and professional use. Both for children and adult hobbyists.
With the 3Dandprint pen you draw amazing 3D drawings
Make your own jewelry, artwork or building models or use the 3D Pen for repairing toys. The possibilities are endless. Compare our 3D pens below to see which one is best suited for you!
Get started right away with the filaments and these 5 design stencils:
- Eiffel Tower
How to draw with a 3D pen
It has never been easier to create objects from scratch.
- Grab the pen
- Plug it in
- Wait for it to warm up
- Place a filament at the top of the pen
- The 3D pen is now ready to use, just draw!
What can you make with a 3D pen?
From useful plastic objects to the most beautiful decorative creations. The heat melts the filament, after which you can easily make anything by simply drawing. Once out of the pen, the filament hardens almost immediately. This makes it possible to draw three-dimensionally and thus make objects! Think of:
- building models
- works of art
Quickly discover this fun 3D hobby and get started right away with the starter pack!
Ordering refills filament
You can always order refills for the 3D pen in our webshop:
- Single PLA filament per 10 metres, available in 12 colours
- PLA filament value pack with 6 colours
- PLA filament value pack with 9 colours
- 1 kg PLA filament by the roll of 330 m, available in 9 colours
- 1 kg ABS-pro-filament on roll of 330 metres, available in 4 colours
Frequently asked questions about 3D Pen Starter Kit
The 3D pen can be used from the age of 14. Under the age of 14, only under supervision. The nozzle of the 3D pen can become extremely hot, reaching temperatures of up to 230 °C. Please read the safety instructions before you start.
You cannot change your creation by reheating the filament. If you want to change small pieces, you can press the hot nozzle against the filament and try to adjust it. You can also try to put the filament in hot water so it becomes a little softer. Be careful that you don’t break your creation by accident.
We advise you to remove the filament by holding the on/off button for 2 seconds on the 3D pen. The filament will come out of the back from the 3D pen this way. Don’t forget to cut the filament that came out of the pen straight.
Yes, you can draw in the air with the 3D pen. You have to start on a surface, for example a stencil.
We advise you to use the 3D pen for 1.5 hours max. After 1.5 hours of working with the 3D pen, turn it off for half an hour to allow the pen to cool down. When you have done this you can start again.
When you want to change filaments, you have to get the current color filament out of your 3D pen. To do this you will have to hold the on/off button on the 3D pen for 2 seconds. The filament that is in the pen will now come out of the backside of the 3D pen. Don’t forget to cut the filament straight before you put it into the pen.
PLA, ABS and PETG
We are always there for you
Do you have a question about one of our products or about your order? Our team is ready to answer all your questions.
Our customer service is available from Monday to Friday between 09:00 and 17:30
This product is rated with a 9,4
"Works much better then the cheap chinese knockoffs! You can easily extrude just a little dot (stop the pen quickly) and it stops! Chinese knockoff will keep going and going and going extruding at least 2 more inches if not more when stopped, wasting your filament. Not this pen! Stops beautifully !!!! Have fun decorating things with dots or even making objects out of dots!"
Vera - 21-06-2022
"I like it!"
Shana - 04-01-2022
3D Pen Starter Kit - Black
Customers rate us 9,0!
Parthiban S - 12-03-2023
sally devorsine - 09-03-2023
Hi, can we help you with something? You can send us a message via (web)-whatsapp. Rather speak to someone by phone? We are available on working days between 09:00 and 17:30 on 020 – 261 4883.